Manual honey extractors

The hand-operated honey extractor is the entry-level model for beekeepers. For small numbers of people, the hand-operated centrifuge is an inexpensive alternative to the motor-driven honey extractor. The slingshots we offer in the online shop can also be picked up and viewed in our shop. The drive with hand crank can be replaced at any time by a motor. The boiler is made of stainless steel and, depending on its size, is designed for several frames. After the end cap, the honeycombs are inserted into the centrifuge basket from above, the lid is closed and the honey extractor is rotated manually. The speed is gradually increased until honey no longer spurts out of the honeycomb. The beekeeper should spin the spin cycle for about ten minutes at a constant speed. During the spinning process, work must be carried out without jerks to prevent the honeycombs from breaking in the honey extractor. The size of the honey extractor should be chosen according to the honeycomb size. The different sizes of honeycomb, zander, Dadant or German standard size require different honey extractors or kettle sizes. We would be happy to advise you on the selection of your beekeeping needs.


In stock

ApiNord® 4 W spinner Ø 52 without shaft hand

SKU:
HH-5485
GTIN:
4250605419288
Manufacturer:
Shipping weight:
20,40 kg
Item weight:
20,00 kg
499,00 € *
Low stock level
Delivery time: 2 - 6 Workdays
Out of stock
Honigschleuder mit Honigbehälter und Honigsieb. Die vier Wabenschleuder wird direkt auf den Honigabfüllbehälter aufgesetzt und mit Verschlüssen befestigt. Zwische Honigschleuder und Abfüllbehälter kommt das mitgelieferte Honigsieb.
SKU:
LE-4517SX
GTIN:
4250605405939
Manufacturer:
Shipping weight:
15,00 kg
Item weight:
13,00 kg
329,00 € *
Currently out of stock
In stock
Tangential honey extractor Quattro with manual drive, three detachable legs, inexpensive honey extractor, plastic tap with Ø40mm, two Plexiglas lid halves made of stainless steel for max. four honeycombs or two brood combs Dadant, German standard size or Zander. Diameter of the extractor 380mm. Inclined bottom.
SKU:
LE-4518SX
GTIN:
4250605405908
Manufacturer:
Shipping weight:
30,00 kg
Item weight:
25,00 kg
295,00 € *
Available immediately
Delivery time: 2 - 6 Workdays
In stock
Honigschleuder mit Handantreib für 4 Honigwaben Langstroth, Zander oder deutsch Normalmaß. Der Kurbelantrieb ist mit Freilauf und Bremse versehen. Umrüstung auf Motorbetrieb jederzeit möglich. Durchmesser des Schleuderkessels 520mm. Schleuderhöhe 96cm. Ablauf über Kunstoff Quetschhahn.
SKU:
LE-4606SXJ
GTIN:
4250605406172
Manufacturer:
Shipping weight:
20,00 kg
Item weight:
17,00 kg
625,00 € *
Low stock level
Delivery time: 2 - 6 Workdays
Out of stock
Tangential- Radial schleuder "Jolly" fuer 5 Tangential und 15 Waben Radial, Stahlen Handantrieb Freilauf mit Bremse, Schleuderkorb aus Edelstahl, Scharnierente Deckel
SKU:
LE-SS519CJ
Manufacturer:
Shipping weight:
30,00 kg
620,00 € *
Currently out of stock
Tangential spinner "Micro" with manual drive freewheel with brake, stainless steel spinning basket for 3 Dadant or long straw honeycombs, lid
SKU:
LE-4506SX
GTIN:
4250605414948
Manufacturer:
Shipping weight:
16,00 kg
Item weight:
15,00 kg
399,00 € *
Available immediately
Delivery time: 16 - 20 Workdays
Tangential extractor "Micro" with manual drive, stainless steel extractor basket for 3 Dadant or long straw honeycombs
SKU:
LE-4507SX
GTIN:
4250605409111
Manufacturer:
Shipping weight:
16,00 kg
Item weight:
15,00 kg
339,00 € *
Available immediately
Delivery time: 16 - 20 Workdays

Items 1 - 7 of 7